 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PRELIMINARY DATA SHEET LASER DIODE NX5315 Series 1 310 nm FOR FTTH PON APPLICATION InGaAsP MQW-FP LASER DIODE DESCRIPTION The NX5315 Series is a 1 310 nm Multiple Quantum Well (MQW) structured Fabry-Perot (FP) laser diode with InGaAs monitor PIN-PD. These devices are designed for application up to 1.25 Gb/s. APPLICATION * FTTH PON (B-PON, G-PON, GE-PON 10 km) system FEATURES * Optical output power * Low threshold current * Differential Efficiency * InGaAs monitor PIN-PD * CAN package * Focal point Po = 13.0 mW lth = 6 mA d = 0.5 W/A * Wide operating temperature range TC = -40 to +85C 5.6 mm 6.35 mm The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices representative for availability and additional information. Document No. PL10531EJ01V0DS (1st edition) Date Published August 2004 CP(K) Printed in Japan NEC Compound Semiconductor Devices, Ltd. 2004 NX5315 Series PACKAGE DIMENSIONS (UNIT: mm) 5.6+0.00 -0.03 4.20.1 3.550.1 1.00.1 BOTTOM VIEW 1 2 3 4 0.3+0.1 -0.0 2.0 1102 0.3+0.1 -0.0 3.870.3 6.350.5 Focal Point x = 300 m MAX. y = 300 m MAX. *1 2.970.2 PIN CONNECTIONS NX5315EH Reference Plane 2 1 (Case) LD 4 PD 3 PD 3 2 4 NX5315EK 1 (Case) LD 15.01.0 1.20.1 4- 0.45 2.0 *1 Focal Point: A point to get maximum optical output power from fiber. 2 Preliminary Data Sheet PL10531EJ01V0DS NX5315 Series ORDERING INFORMATION Part Number NX5315EH Package 4-pin CAN with ball lens cap 2 PD 3 1 LD 2 4 PD 3 Pin Connections 1 LD 4 NX5315EK Remarks 1. The color of ball lens cap might be observed differently from our can package products. 2. The hermetic test will be performed as AQL 1.0%. Preliminary Data Sheet PL10531EJ01V0DS 3 NX5315 Series ABSOLUTE MAXIMUM RATINGS Parameter Optical Output Power Forward Current of LD Reverse Voltage of LD Forward Current of PD Reverse Voltage of PD Operating Case Temperature Storage Temperature Assembly Temperature Lead Soldering Temperature Relative Humidity (noncondensing) Symbol Po IF VR IF VR TC Tstg Tasb Tsld RH Ratings 20 150 2.0 10 20 -40 to +85 -40 to +85 150 (15 Hr) 350 (3 sec.) 85 Unit mW mA V mA V C C C C % ELECTRO-OPTICAL CHARACTERISTICS (TC = 25C, unless otherwise specified) Parameter Operating Voltage Threshold Current Differential Efficiency Center Wavelength Symbol Vop Ith Po = 13.0 mW Conditions MIN. TYP. 1.1 6 0.40 Po = 13.0 mW, RMS (-20 dB) TC = -40 to +85C Spectral Width Po = 13.0 mW, RMS (-20 dB) TC = -40 to +85C Rise Time Fall Time Monitor Current Monitor Dark Current Monitor PD Terminal Capacitance Fiber Coupling Power Focal Distance tr tf Im ID Ct Pf Df 10-90% 90-10% VR = 1.5 V, Po = 13.0 mW VR = 10 V VR = 10 V, f = 1 MHz Po = 13.0 mW, Optimized Coupling with 8 degree angled SMF 5.85 5 2.0 6.35 6.85 100 0.15 0.15 200 100 20 0.3 0.3 ns ns 1.5 2.8 nm 1 276 0.50 1 310 1 352 MAX. 1.5 15 Unit V mA W/A nm d C A nA pF mW mm 4 Preliminary Data Sheet PL10531EJ01V0DS NX5315 Series REFERENCE Document Name OPTICAL SEMICONDUCTOR DEVICES FOR FIBEROPTIC COMMUNICATIONS SELECTION GUIDE Opto-Electronics Devices Pamphlet Document No. PL10161E PX10160E Preliminary Data Sheet PL10531EJ01V0DS 5 NX5315 Series * The information in this document is current as of August, 2004. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd. and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4 - 0110 6 Preliminary Data Sheet PL10531EJ01V0DS NX5315 Series SAFETY INFORMATION ON THIS PRODUCT DANGER INVISIBLE LASER RADIATION AVOID DIRECT EXPOSURE TO BEAM OUTPUT POWER mW MAX WAVELENGTH nm CLASS lllb LASER PRODUCT SEMICONDUCTOR LASER AVOID EXPOSURE-Invisible Laser Radiation is emitted from this aperture Warning Laser Beam A laser beam is emitted from this diode during operation. The laser beam, visible or invisible, directly or indirectly, may cause injury to the eye or loss of eyesight. * Do not look directly into the laser beam. * Avoid exposure to the laser beam, any reflected or collimated beam. Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. For further information, please contact NEC Compound Semiconductor Devices, Ltd. http://www.ncsd.necel.com/ E-mail: salesinfo@ml.ncsd.necel.com (sales and general) techinfo@ml.ncsd.necel.com (technical) Sales Division TEL: +81-44-435-1588 FAX: +81-44-435-1579 NEC Compound Semiconductor Devices Hong Kong Limited E-mail: ncsd-hk@elhk.nec.com.hk (sales, technical and general) FAX: +852-3107-7309 TEL: +852-3107-7303 Hong Kong Head Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Taipei Branch Office FAX: +82-2-558-5209 TEL: +82-2-558-2120 Korea Branch Office NEC Electronics (Europe) GmbH http://www.ee.nec.de/ TEL: +49-211-6503-0 FAX: +49-211-6503-1327 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 0406 |
Price & Availability of NX5315
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |